|
Single-Phase Conventional Transformer
- TYPE: Single-Phase, 50 or 60 Hz
- LIQUID TYPE: Mineral Oil or Envirotemp® FR3™ Fluid
- kVA: 5-500
- PRIMARY VOLTAGE: 2400-46,000 V
- SECONDARY VOLTAGE: 120-600 V
The single-phase conventional overhead transformer is designed with an interlaced core (5-50 kVA) recommended by Electric Power Research Institute(EPRI). Polymer low-voltage bushings are standard at 5-50 kVA. Radiators are included at 250 kVA and above.
Single-Phase Completely Self-Protected Transformer - (CSP)
- TYPE: Single-Phase, 50 or 60 Hz
- LIQUID TYPE: Mineral Oil or Envirotemp FR3 Fluid
- kVA: 5-167
- PRIMARY VOLTAGE: 2400-19,920 V
- SECONDARY VOLTAGE: 120-600 V
Protected transformers are available with a variety of protection options including a MagneX® Interrupter, a secondary breaker with weak link for secondary fault and overload protection, a primary weak link fuse, current-limiting fusing for high interrupting ratings and limiting fault currents, and internal or external lightning arresters.
Lightning Protected Transformer (LPT ™  )
- TYPE: Single-Phase, 50 or 60 Hz
- LIQUID TYPE: Mineral Oil or Envirotemp FR3 Fluid
- kVA: 5-500
- PRIMARY VOLTAGE: 2400-46,000 V
- SECONDARY VOLTAGE: 120-600 V
The Lightning Protected Transformer virtually eliminates transformer failure due to lightning. An internally-gapped, direct connected VariGAP® arrester, designed by Cooper, provides overvoltage protection.
Cooper’s STORM TRAPPER® high-energy arrester, a low-voltage distribution arrester, is mounted directly to the transformer secondary windings, protecting the transformer from failures caused by secondary induced surges. A properly coordinated D-Link fuse by Cooper provides superior over-current protection.
For more information or to request a quote, please contact RM Reps.
|
1 PHASE TRANSFORMER INFO
|
